| STRUCTURAL CHARACTERISTICS
|
| |
| DELIVERY BODY |
Made from stainless steel, particularly resistant to mechanical stress, knocks and corrosion, fitted with gas threaded vertical delivery opening. |
| SUCTION STRAINER |
Made from stainless steel, providing the support base for the pump. |
| HOSE JOINT |
Technopolymer with screw fitting. |
| IMPELLER |
Technopolymer open |
| EXTERNAL FLOAT SWITCH |
For automatic pump operation |
| DOUBLE MECHANICAL SEAL |
carbon/alumina on the pump side and sealing ring on the motor side (with barrier oil chamber
to lubricate and cool the sealing surfaces in the absence of water) |
| MOTOR: |
Seal induction MOTOR, suitable for continuous duty with built-in thermal cutout relay (motor protector ).INSULATION CLASS B
(provides the motor with a considerable overload tolerance and substantially increases the service life of the motor itself).
Cooling of motor assured by the liquid in when the pump is immersed. |
| INSULATION |
Class B |
| PROTECTION |
IP68 |
| SUPPLY CABLE |
Neoprene submersible .Supplied standard with 5 meters of cable and plug (10 meters on request) |
| CONSTRUCTION AND SAFETY STANDARDS
in compliance with IEC. |
|
