PERFORMANCE
The wide range of pump in the JETS series satisfied the most varied requirements with features such as:
- high heads with respect to power required.
-flat operating and power absorption curves, giving
moderate curve variations with respect to large variations in
delivery demand.
-high tolerance of the presence of entrained air in the fluid to
be pumped.
-suction capacity up to 9 meters
PERFORMANCE RANGE
Flow rate up to 60 l/min (3.6m3/h)
Dynamic head up to 45m
OPERATING LIMITS
Suction lift up to 9 m
Fluid temperature up to + 50¡æ
Maximum ambient temperature +40¡æ
INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to pump components.
They are extremely reliable,economical and simple to use, being particularly suitable for domestic applications such as the automatic distribution of water from small and medium-size tanks, watering gardens,etc.
These pumps should be installed in a covered area. protected against the weather.
WARRANTY: 1 YEARS
(according to our general sales conditions).
STRUCTURAL CHARACTERISTICS
PUMP BODY Stainless steel
HOLDING DISK Techno polymer (approved For Drinking Water)
FRONT COVER Aluminium
EJECTOR UNIT Techno Polymer (approved For Drinking Water)
IMPELLER Centrifugal Radial Flow In Brass Or Technopolymer (approved For Drinking Water)on Request.
MECHANICAL SEAL Ceramic and graphite
MOTOR:
The Pumps Are Coupled Directly To An Asynchronous, High Efficient SILVER ELEPHANT Induction Motor Of Suitable Size,
which Is Quiet Running, Closed And Extremely Ventilated, Suitable For Continuous Duty. Insulation Class B.
The thermal cutout relay (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector, with connections according to current standards.
INSULATION Class B
PROTECTION IP44
CONSTRUCTION AND SAFETY STANDARDS in compliance with IEC.
 
   
   
Water Pump, Centrifugal Pump, Self-Priming JET Pump, Submersible Pump, Self-suction Pump, link